Fans & Heaters

Dyson purifiers have intelligent sensing. Three sensors work in harmony to constantly monitor your air quality – interacting with our unique algorithm to diagnose and report pollutants in real-time. It also has two layers of purification to thoroughly clean your air. HEPA H13 and activated carbon filtration captures gases and 99.95% of pollutants as small as 0.1 microns.2 And the whole purifier, not just the filtration system, is fully-sealed to HEPA H13 standard3 – so what goes inside, stays inside. Only Dyson purifiers have Air Multiplier technology, to purify the whole room.4 It generates powerful circulation, drawing pollutants from every corner into the filters and projecting purified air throughout the room. In warmer weather, a powerful stream of purified airflow can cool you down. Air Purifier: Y Cooling Fan: Y Cooling Fans Type: Pedestal Depth: 220 MM Removes 99.95% of ultrafine particles1 Purifies the whole room2 Fully sealed to HEPA standard – what goes inside, stays inside 3 Automatically senses, reacts and displays real-time air quality Jet axis control allows two oscillators to guide airflow through apertures at a 90° range. Detects particles and VOCs in the air. An activated carbon filter captures gases such as benzene and NO2 5 Height: 1050 MM Speed Settings: Dyson engineers Width: 220 MM

Dyson Purifier Hot+Cool Formaldehyde | 381387-01Captures dust, allergens and bacteria. Even destroys formaldehyde.1 Fully-sealed to HEPA standard – what goes inside, stays inside.Powerful circulation to purify the whole room3 - Only Dyson purifiers have Air Multiplier™ technology, to draw in distant pollutants and project purified air throughout the room.3Senses and reports automatically - Four sensors, including a solid-state formaldehyde sensor, interact with our unique algorithm to precisely diagnose, display and react to your air quality.Captures and destroys with advanced HEPA filtration - The HEPA+Carbon filter captures gases5 and 99.95% of particles as small as 0.1 microns.2 Our catalytic filter continuously destroys formaldehyde1. Destroys formaldehyde in billions of catalytic tunnels1 Dyson's unique catalytic filter continuously traps and converts formaldehyde into water and CO2. And it self-regenerates, so it never needs replacing.The only purifier fully sealed to HEPA H13 standard - To prevent pollutants leaking back into the air, it's not just the filter that's sealed to HEPA H13 standard, it's the whole purifier4. So what goes inside, stays inside. Heats in winter. Cools you in summer. In winter, Air Multiplier™ technology projects purified, heated air throughout the room.4 Once your target temperature is reached, heating automatically stops. In warmer weather, Air Multiplier™ projects over 290 litres of air a second for cooling airflow.Smart purification, controlled by app or voice - Control and monitor air quality from anywhere with the Dyson Link app,6 or hands-free with compatible voice services.7 Diffused mode. Purifies without cooling you. Airflow is diverted through the back of the machine, maintaining effective purification.Oscillates up to 350 -  Adjustable oscillation projects purified air around the whole room. Night mode For lighter sleepers, it monitors and purifies using the quietest settings along with a dimmed display.Easy filter care - The catalytic filter never needs replacing. And when you need a new HEPA+Carbon filter, the Dyson Link app6 lets you know.In the box: Dyson Replacement Filter Remote Control1 Third party full machine testing based on GB/T 18801-2018 formaldehyde cumulative clean mass testing with continuous injection until plateau of formaldehyde CADR is achieved. Results may vary in practice.2 Tested for filtration efficiency at 0.1 microns (EN1822, ISO29463)3 In maximum setting. Tested for air projection, purification coverage in a 81m3 room.4 Particle challenge by DEHS oil specified in EN1822 within a chamber specified in ASTM F3150. Tested in Max Mode at IBR US, for whole machine efficiency above 99.95%.5 Gas capture rates may vary.6 Requires device to run app, Wi-Fi or mobile data, Bluetooth 4.0 support, and iOS version 10 or Android version 5 (or above). Standard data and messaging rates may apply. App control doesn’t apply to heating.7 Refer to the Dyson Link app for compatible voice services.

Dyson HP07 Purifier Hot+Cool Purifying Fan Heater | 368865-01 Captures dust, allergens and bacteria. Fully-sealed to HEPA standard – what goes inside, stays inside. Powerful circulation to purify the whole room2 Only Dyson purifiers have Air Multiplier™ technology, to draw in distant pollutants and project purified air throughout the room.2 Senses and reports automatically Three sensors interact with our unique algorithm to precisely diagnose, display and react to your air quality. Captures and destroys with advanced HEPA filtration The HEPA+Carbon filter captures gases4 and 99.95% of particles as small as 0.1 microns.1 The only purifier fully sealed to HEPA H13 standard To prevent pollutants leaking back into the air, it's not just the filter that's sealed to HEPA H13 standard, it's the whole purifier3. So what goes inside, stays inside. Heats in winter. Cools you in summer. In winter, Air Multiplier™ technology projects purified, heated air throughout the room.3 Once your target temperature is reached, heating automatically stops. In warmer weather, Air Multiplier™ projects over 290 litres of air a second for cooling airflow. Smart purification, controlled by app or voice Control and monitor air quality from anywhere with the Dyson Link app,5 or hands-free with compatible voice services.6  Diffused mode. Purifies without cooling you. Airflow is diverted through the back of the machine, maintaining effective purification. Oscillates up to 350 ̊ Adjustable oscillation projects purified air around the whole room. Night mode For lighter sleepers, it monitors and purifies using the quietest settings along with a dimmed display. Easy filter care The catalytic filter never needs replacing. And when you need a new HEPA+Carbon filter, the Dyson Link app5 lets you know. In the Box Dyson Replacement Filter Remote control 1 Tested for filtration efficiency at 0.1 microns (EN1822, ISO29463) 2 In maximum setting. Tested for air projection, purification coverage in a 81m3 room. 3 Particle challenge by DEHS oil specified in EN1822 within a chamber specified in ASTM F3150. Tested in Max Mode at IBR US, for whole machine efficiency above 99.95%. 4 Gas capture rates may vary. 5 Requires device to run app, Wi-Fi or mobile data, Bluetooth 4.0 support, and iOS version 10 or Android version 5 (or above). Standard data and messaging rates may apply. App control doesn't apply to heating. 6 Refer to the Dyson Link app for compatible voice services.